Skip to main content
The Cricut EasyPress delivers professional heat transfer results at home. Unlike a household iron, it provides consistent, even heat across the entire pressing surface — eliminating the hot spots and uneven pressure that cause peeling designs and wasted materials.

​
EasyPress Models at a Glance

Cricut offers several EasyPress models to fit every project size and workflow:
  • EasyPress Mini LT — Compact handheld press ideal for small accessories like hats, shoes, socks, and stuffed animals.
  • EasyPress 2 — Available in 6×7”, 9×9”, and 12×10” sizes. Great for everyday iron-on projects on garments and tote bags.
  • EasyPress 3 — Same size options as the EasyPress 2, with an upgraded digital temperature display, precise degree-by-degree control, and auto-shutoff.
  • EasyPress SE — A streamlined version designed for everyday use with simplified controls.

​
Setup and First Use

1

Prepare Your Surface

Place your EasyPress on the included EasyPress mat or another hard, heat-resistant surface. A firm, stable base ensures even pressure during pressing.
If you don’t have an EasyPress mat yet, a tightly folded towel on a hard table works as a temporary substitute. The mat’s insulating layer improves heat transfer and protects your work surface.
2

Plug In and Power On

Connect the power cord and press the power button. The indicator light (EasyPress 2/Mini LT) or digital display (EasyPress 3) will turn on.
3

Look Up Your Settings in the Cricut Heat Guide

Open a browser and go to heat.cricut.com. Enter your iron-on material type and your base material (e.g., cotton, polyester, canvas) to get the exact recommended temperature and pressing time.
4

Set the Temperature and Wait for Preheat

Dial in the temperature from the Heat Guide. The indicator light will change color — or the display will show a checkmark — once the press reaches the target temperature and is ready to use.
The EasyPress 3 features a built-in countdown timer. Set the press time directly on the device and it will beep when the session is complete — no separate timer needed.
5

Pre-Press Your Garment

Press your blank garment for about 5 seconds without any design on it. This removes moisture and smooths out wrinkles, creating a clean, flat surface for the iron-on to adhere to.
6

Position Your Iron-On Design

Place your cut iron-on design on the garment with the shiny liner side facing up and the design facing down against the fabric. Arrange it exactly where you want the final image to appear.
Always mirror your iron-on design in Cricut Design Space before cutting. Iron-on applies face-down, so a non-mirrored design will appear reversed on the finished project.
7

Apply Heat and Pressure

Lower the EasyPress firmly and evenly onto the design. Press for the full time recommended by the Cricut Heat Guide — apply steady, consistent downward pressure throughout.
8

Cool and Peel the Liner

Allow the design to cool, then peel the liner according to your vinyl type. Follow the guide below for peel timing.

​
Hot Peel vs. Cold Peel

The correct peel method depends on your iron-on material. Peeling at the wrong time can cause designs to lift or not adhere properly.
When in doubt, always check the Cricut Heat Guide for the peel method specific to your material. Guessing can ruin an otherwise perfect press.